Kent Commercial

KENT Perk

KENT Perk, a Chiller/ Water Dispenser, comes with KENT's patented Mineral ROTM Technology and an inbuilt TDS controller. Best suited for homes, offices, showrooms, restaurants, institutions, etc.

Specifications
Applications Suitable for Brackish/Tap Water
Purification Capacity Up to 50 L/hr
Body Material ABS Food Grade Plastic
Installation Floor Standing
Inlet Water Pressure/Temp (Min) 0.3 kg / cm2 or 29419.95 Pa
Inlet Water Pressure/Temp (Max) 3 kg / cm2 or 294199.5 Pa
Filter Cartridges Sediment, Carbon Block
UF Filter Ultrafiltration Membrane
Auto-Flushing System Yes
Storage Capacity 20L
Membrane Type Thin Film Composite RO 1812-75GPD
Booster Pump Voltage 24VDC
Rated Current 1.8 Amp
Cooling Capacity(±5%) 755BTU/hr
Compressor THK9384YCG, Tecumseh make or equivalent
Temp. Class ST
Refrigerant R134a
Refrigerant Mass 90g
Condenser Forced convection air cooled
Condenser Fan Axial Flow Type
Expansion Device Capillary Tube
Evaporator Coil Type
Weight 38.0 kg
Input Power Supply 230V AC, 50/60 Hz

KENT Elite

An advanced under the counter RO water purifier with KENT's patented Mineral ROTM Technology and an inbuilt TDS controller. Best suited for commercial establishments like offices, restaurants and homes. Suitable for purification of brackish/tap water/municipal corporation water supply.

Specifications
Applications Suitable for Purification of Brackish/Tap
Water Municipal Corporation Water
Installation Suitable as attachment to water coolers
Body Material ABS Food Grade Plastic
Mounting Wall Mounted
Purification Production Rate 35 L/hr.
Maximum Duty Cycle 175 L/Day
Filter Cartridge Sediment, Activated Carbon
Membrane Type Thin Film Composite RO (2)
UF Membrane 0.1 - 0.01 Micron
Auto Flushing System Yes
Inlet Water Pressure/Temp (Min) 0.3 kg / cm2 or 4.3psi / 10°C or 50°F
Inlet Water Pressure/Temp (Max) 3 kg / cm2 or 42.7psi / 40°C of 104°F
Min. /Max. Working Pressure 20/150psi
Min. /Max. Operating pH 2-11
Total Power Consumption 60 W
Dimension (mm) 415 (L) x 222 (W) x 410 (H)
Net Weight 14.2 kg
Input Power Supply Single Phase 100 - 250 V AC, 50 Hz

KENT Elite II

An advanced RO water purifier with KENT's patented Mineral ROTM Technology and an inbuilt TDS controller. Best suited for online purification. Suitable for purification of brackish/tap water/municipal corporation water supply.

Specifications
Application Suitable for Purification of Brackish/Tap Water,
Municipal Corporation Water
Installations Suitable as attachment with water coolers
Body Material Stainless Steel
Mounting Floor Standing
Purification Production Rate 75 L/hr.
Max Duty Cycle 375 L/day
Filter Cartridge Sediment, Activated Carbon, UF
Membrane Type Thin Film Composite RO
UF Membrane 0.1 – 0.01 Micron
Auto Flushing System Yes
Inlet Water Pressure/Temp (Min) 0.3 kg / cm2 or 4.3psi / 10°C or 50°F
Inlet Water Pressure/Temp (Max) 3 kg / cm2 or 42.7psi / 40°C or 104°F
Min. / Max. Working Pressure 20/150psi
Min. /Max. Operating pH 2-11
Booster Pump Voltage 24 V DC
Input Power Supply Single Phase 100 - 250 V AC, 50 Hz
Dimensions (mm) L 445 x W 255 x H 840
Net Weight 25 kg